I made a passport wallet, a must-have item for exciting travel. This bag is the right size to store passports, credit cards, and bills. It can be used in two ways: horizontally or vertically. It’s not difficult to make, so why not make it with me?
The finished measurements of this bag are approximately 6¼″(16㎝) W × 4⅜″(11㎝) H.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◎ Main Panel
① 7⅛″ × 5⅛″ (18㎝ × 13㎝) Outer layer
③ 7⅛″ × 5⅛″ (18㎝ × 13㎝) Lining
② 6¼″ × 4⅜″ (16㎝ × 11㎝) Mid-weight woven fusible interfacing
◎ Front Pocket
① 7⅛″ × 1¾″ (18㎝ × 4.5㎝) Outer layer
① 7⅛″ × 1¾″ (18㎝ × 4.5㎝) Lining
① 6¼″″ × 1″ (16㎝ × 2.5㎝) Mid-weight woven fusible interfacing
① 7⅛″ × 3¾″ (18㎝ × 9.5㎝) Outer layer
① 7⅛″ × 3¾″ (18㎝ × 9.5㎝) Lining
① 6¼″ × 3″ (16㎝ × 7.5㎝) Mid-weight woven fusible interfacing
◎ Inside Pocket
① 7⅛″ × 6¾″ (18㎝ × 17㎝) Lining
① 6¼″ × 3″ (16㎝ × 7.5㎝) Mid-weight woven fusible interfacing
◎ Others
② 6″ (15㎝) Zipper
① 5/8″ (1.5㎝) wide Webbing Strap 43½″ (110㎝)
② 5/8″ (1.5㎝) wide Dring
① 5/8″ (1.5㎝) wide Swivel Snap
① 5/8″ (1.5㎝) wide Triglides Slide
With assembled the outer layer of the front pocket right side up, center zipper right side facing down along top edge. Bend zipper ends in place. Using your zipper foot, sew along top edge using a 1/4″ seam allowance.
Place the lining, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Place the bag strap on the right side of the back panel and sew.
With assembled front pocket right side up, center zipper right side facing down along top edge. Bend zipper ends in place. Using your zipper foot, sew along top edge using a 1/4″ seam allowance.
Place the lining, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Place the inner pocket on the right side of the lining and sew.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Flip the layers so the outer bag pieces are right sides together, and the lining pieces are right sides together. Sew with an allowance of about 1cm, leaving an opening.
Turn right side out through the opening. After this, sew up this opening.
Attach the strap.
YOU ARE FINISHED!
Happy sewing!
