I want to share with you how to sew the perfect coffee sleeve holder for a Christmas gift. It is an easy project. Simply slide the sleeve onto the cup and you’re ready to go. In addition, it is convenient to carry many cups. I shared with you coffee sleeve holder pattern and this pattern will fit Tall or Grande sized cups.
Let’s make it started!!!
Reusable Cup Holder Sewing Tutorial
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( quilting cotton )
1 11⅛″ × 3¾″(28㎝ × 9.5㎝)
1 1⅝″ × 20″(4㎝ × 50㎝)
Lining ( quilting cotton )
1 11⅛″ × 3¾″(28㎝ × 9.5㎝)
Mid-weight woven fusible interfacing (Pellon SF-101 Shape Flex’ or ‘Vilene G700’)
1 10″ × 3¼″(25㎝ × 8㎝)
Cut the interfacing into the shape of the pattern. Fuse the interfacing, centered, to the wrong side.
Cut by adding 3/8” from the edge of the interfacing.
Fold the handle piece in half, wrong sides together to make a crease. Then fold each edge in toward the middle and press. Stitch along both long edges of the strip, 1/8” from the edge. Place the handle on the outer layer and sew. then place the lining over it and pin it.
Sew along top edge using a 3/8″ seam allowance.
Open out, fold half. Sew with an allowance of about 3/8″.
Open and press all seams.
Fold the outer and lining shown above and gather them inside.
Face the outer and lining underneath. Sew all the way around, leaving a 2-inch opening.
Turn out our coffee sleeve holder through the hole that we left not stitched. After this, topstitch all the way around of the top and bottom line.
YOU ARE FINISHED!
Happy sewing!
