This Double Zipper Box Pouch is a great size to carry many small products and has two zippers for two separate compartments. And it has a handle, making it the perfect pouch to use when traveling. You can learn how to make two completely separate lined and zippered sections.
How to make a Travel Pouch with Two Zip
The finished measurements of this bag are approximately 8¾″(22㎝) W × 5⅛″(13㎝) H × 3¼″(8㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( Quilting Cotton )
1 14⅝″ × 2″ (37㎝ × 5㎝)
1 14⅝″ × 15½″ (37㎝ × 39㎝)
2 2⅜″ × 2″ (6㎝ × 5㎝)
1 2⅜″ × 12″ (6㎝ × 30㎝)
Lining ( Quilting Cotton )
2 14⅝″ × 13⅞″ (37㎝ × 35㎝)
Zipper
2 14¾″(37㎝)
Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
1 13⅞″ × 1¼″ (35㎝ × 3㎝)
1 13⅞″ × 14⅝″ (35㎝ × 37㎝)
The pattern for making this can be drawn by yourself by watching my YouTube video.
With assembled outer layer right side up, center zipper right side facing down along top edge. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Place the lining, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Leave an opening on one side of the lining.
Open out, press pieces away from and top stitch on 1/8” away from the zipper.
Place the handle on the right side of the outer layer and sew.
Fold the lining right sides together in half. Attach the lining to the other side of the zip the same way.
Place the outer layer on top of the zip.
Fold the outer layer right sides together in half.
Attach the outer to the other side of the zip the same way.
Open out, press pieces away from and top stitch on 1/8” away from the zipper.
Turn wrong side out. Place the right sides together of the both sides of the outer layer. Sew only the visible part of the outer fabric.
Then Sew the both sides only the lining.
Combine the seams so that sides are formed. Sew with an allowance of about 3/8″.
Turn out our double zipper pouch through the hole that we left not stitched. After this, sew up this hole.
YOU ARE FINISHED!
Happy sewing!
