Welcome to our latest DIY sewing tutorial, where we’ll show you how to create a stunning floral zipper pouch using a combination of floral and solid color fabric! This step-by-step guide is perfect for beginners and seasoned crafters alike, offering clear instructions for sewing this stylish accessory. With its unique square front and triangular side design, this pouch is perfect for storing small cosmetics or necessities. Join us as we demonstrate each step of this fabric combination project, helping you add a touch of elegance to your accessories collection.
The finished measurements of this bag are approximately 6¼″(16㎝) W × 4¾″(12㎝) H × 2⅜″(6㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◆ Main Panel
① 9⅞″ × 6¾″ (25㎝ × 17㎝) Outer layer
① 9⅞″ × 6¾″ (25㎝ × 17㎝) Contrast Color Fabric
② 9⅞″ × 6¾″ (25㎝ × 17㎝) Lining
② 8¾″ × 6″ (22㎝ × 15㎝) Fusible fleece
◆ Front Pocket
① 9⅞″ × 5⅜″ (25㎝ × 13.5㎝) Outer layer
① 9⅞″ × 5⅜″ (25㎝ × 13.5㎝) Lining
◆ Flap
① 6¾″ × 5⅝″ (17㎝ × 14㎝) Contrast Color Fabric
◆ Others
① 6″ (15㎝) Zipper
Place the right sides together of the outer and lining of the front pocket and sew with an allowance of about 3/8″.
Open out, press pieces and topstitch the front pocket.
Fold the flap fabric in half with the outer sides facing each other. Sew with a 3/8″ seam allowance, leaving an opening.
Turn it right side out through the opening. And sew close to the edge on all sides except the top.
Place the front pocket on the main panel, aligning it with the bottom. Sew around the edges of the pocket, excluding the pocket opening.
Place the top edge of the flap 3/4″ in from top of the main panel. Sew only the top of the flap.
With assembled lining right side up, center zipper right side facing up along top edge.
Bend zipper ends in place (at both the pull side and end stop side).
Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Flip the layers so the outer bag pieces are right sides together, and the lining pieces are right sides together.
Sew the sides and bottom, leaving an opening on the lining.
Combine the seams so that a flat base is formed. Sew with an allowance of about 3/8″.
Turn out our pouch through the hole that we left not stitched.
After this, sew up this hole, and the floral zipper pouch is ready!
YOU ARE FINISHED!
Happy sewing!
