Here are two different shapes of pouch bags or cosmetic bags.
You can use it as a small pouch, but if it contains a lot of contents, you can use a larger pouch.
Watching the video and making this pouch will be a great time.
Two shaped purse bag sewing tutorial
The finished measurements of this bag are approximately 7½″(18.5㎝) W × 4″(10㎝) H × 4″(10㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( quilting cotton )
1 12¾″ × 5⅞″ (32㎝ × 15㎝)
Contrast color fabric ( quilting cotton ) –
2 8¾″ × 3⅛″ (22㎝ × 8㎝)
2 2¾″ × 5⅞″ (7㎝ × 15㎝)
2 3⅛″ × 2″ (8㎝ × 5㎝)
Lining ( quilting cotton )
1 12¾″ × 5⅞″ (32㎝ × 15㎝)
2 8¾″ × 3⅛″ (22㎝ × 8㎝)
2 2¾″ × 5⅞″ (7㎝ × 15㎝)
Zipper
1 8″(20㎝)
Interfacing (Fusible Fleece – 987F Fusible Fleece or Vilene H630)
1 12¾″ × 5⅞″ (32㎝ × 15㎝)
2 8¾″ × 3⅛″ (22㎝ × 8㎝)
2 2¾″ × 5⅞″ (7㎝ × 15㎝)
14㎜ Magnetic button
The pattern for making this can be drawn by yourself by watching my YouTube video.
Cut the interfacing into the shape of the pattern.
And fuse the fusible fleece, centered, to the wrong side.
With assembled lining right side up, center zipper right side facing down along top edge.
Pin in place.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Fold the pull tab pieces in half, wrong sides together to make a crease.
Then fold each edge in toward the middle and press.
Stitch along both long edges of the strip, 1/8” from the edge.
Fold in half to make your tabs.
The outer layers are right sides together, and the lining pieces are right sides together.
Sew with an allowance of about 3/8″.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper panel.
Layer the front panel and zipper panel in opposite directions horizontally and vertically.
Pin in place and sew along a 3/8″ seam allowance.
Use the same process to sew the lining.
Sew with an allowance of about 3/8″, leaving a 3-inch opening.
Turn out our cosmetic bag through the opening.
After this, sew up this opening.
Sew magnetic buttons.
YOU ARE FINISHED!
Happy sewing!
