Say goodbye to ordinary zipper pouches and hello to a whole new level of style with our round peanut-shaped zipper pouch tutorial. This project is perfect for anyone looking to add a touch of flair to their sewing projects. With its wide gusset and internal pocket, this pouch offers plenty of storage space for your cosmetics or small items. Follow along as we walk you through the process of creating this trendy and functional accessory.
The finished measurements of this pouch are approximately 8″(20㎝) W × 4¾″(12㎝) H × 2″(5㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◎ Main Panel
② 8¾″ × 5⅝″ (22㎝ × 14㎝) Outer layer
② 8¾″ × 5⅝″ (22㎝ × 14㎝) Lining
② 8¾″ × 5⅝″ (22㎝ × 14㎝) Fusible fleece
◎ Zipper Panel
② 10¾″ × 1⅝″ (27㎝ × 4㎝) Outer layer
② 10¾″ × 1⅝″ (27㎝ × 4㎝) Lining
② 10¾″ × 1⅝″ (27㎝ × 4㎝) Fusible fleece
◎ Gusset
① 12¼″ × 2¾″ (31㎝ × 7㎝) Outer layer
① 12¼″ × 2¾″ (31㎝ × 7㎝) Lining
① 12¼″ × 2¾″ (31㎝ × 7㎝) Fusible fleece
◎ Inside Pocket
① 8¾″ × 7⅛″ (22㎝ × 18㎝) Lining
◎ Others
② 1¼″ × 2″ (3㎝ × 5㎝) Outer layer
① 10″ (25㎝) Zipper
① 1⅝″(4㎝) wide bias tape 51⅜″(130㎝)
Fold the inside pocket in half. And topstitch on top.
Place the inner pocket on the right side of the lining and sew.
Place the wrong sides together of the outer and lining and sew all the edge.
With assembled lining right side up, center zipper right side facing up along top edge. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Place the zipper panel between the gusset lining and the outer layer. Align both ends and sew.
Turn it inside out. Place the right sides together of the lining of the zipper panel and bias tape and sew with an allowance of about 1/4″.
Match the quarter points of the main panel and zipper panel. Sew with a 3/8″ seam allowance.
Fold the bias twice and cover the seam allowance. Just sew and you’re done!!!
Happy sewing!
