Learn how to make a charming cylindrical zipper pouch with our easy DIY tutorial. This small fabric pouch features a side zipper and a connection hook, making it perfect for carrying small accessories or cosmetics. Whether you’re a beginner or an experienced sewist, this project is simple and fun to complete. Watch now and see how you can create this useful and stylish pouch in no time. Don’t miss out on this fantastic sewing project!
The finished measurements of this pouch are approximately 3⅝″(9㎝) Diameter / 2⅜″(6㎝) Height.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
< Medium >
◆ Main Panel
② 4⅜″ × 4⅜″ (11㎝ × 11㎝) Outer layer
② 4⅜″ × 4⅜″ (11㎝ × 11㎝) Lining
② 3⅝″ × 3⅝″ (9㎝ × 9㎝) Fusible fleece
◆ Zipper Panel
① 10½″ × 1⅝″ (26.5㎝ × 4㎝) Outer layer
① 10½″ × 1⅝″ (26.5㎝ × 4㎝) Lining
① 9¾″ × 3/4″ (24.5㎝ × 2㎝) Fusible fleece
① 10½″ × 2″ (26.5㎝ × 5㎝) Outer layer
① 10½″ × 2″ (26.5㎝ × 5㎝) Lining
① 9¾″ × 1¼″ (24.5㎝ × 3㎝) Fusible fleece
◆ Back Panel
① 2⅜″ × 3¼″ (6㎝ × 8㎝) Outer layer
① 2⅜″ × 3¼″ (6㎝ × 8㎝) Lining
① 1⅝″ × 2⅜″ (4㎝ × 6㎝) Fusible fleece
◆ Others
① 10½″(26.5㎝) Zipper
① 5/8″(1.5㎝) wide Swivel Snap
① 2⅜″ × 2″ (6㎝ × 5㎝) Swivel Snap fabric
① 1⅝″(4㎝) wide bias tape 31½″(80㎝)
Place the wrong sides together of the outer and lining and sew all the edges.
With assembled lining right side up, center zipper right side facing up along top edge. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Open out, press pieces away from the zipper. Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Align the sides of the zipper panel to the outer layer and lining of the back panel. Sew along sides using a 3/8″ seam allowance.
Place only the outer layer of back panel on the other side of the zipper panel and sew.
Fold the lining of the back panel inward by 3/8″. Place on the other side of the zipper panel and sew.
Place the right side of bias tape on the top and bottom edges of the zipper panel and sew.
Do this by marking the quarter of your bottom panel and the quarter of your zipper panel. Now, using your quarter marks, start pining the bottom of your zipper panel around the perimeter of your bottom. Sew all the edges with an allowance of about 3/8″.
Use the same process to sew the top panel to the other side of the zipper panel.
Fold the bias of the zipper panel twice. Cover the seam allowance and sew.
Turn right side out.
YOU ARE FINISHED!
Happy sewing!
