This triangular zipper pouch can be easily made from some square fabrics. It is finished with a neat interior with no bias. My YouTube video has a detailed process of making this pouch for beginners. How about making this pyramid bag as a Christmas gift?
Pyramid Bag Easy Tutorial ( with no exposed seams)
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
The finished measurements of this bag are approximately 4¾″(12㎝) W × 4¾″(12㎝) H ×4¾″(12㎝) D .
To make this you will need:
Outer layer ( quilting cotton )
2 5⅜″ × 4¾″(13.5㎝ × 12㎝)
1 6″ × 3/4″(15㎝ × 2㎝)
Lining ( quilting cotton )
2 5⅜″ × 4¾″(13.5㎝ × 12㎝)
Zipper
1 4″(10㎝)
Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
2 5⅜″ × 4¾″(13.5㎝ × 12㎝)
The finished measurements of this bag are approximately 6⅞″(17.5㎝) W × 6⅞″(17.5㎝) H ×6⅞″(17.5㎝) D .
To make this you will need:
Outer layer ( quilting cotton )
2 7½″ × 6¾″(19㎝ × 17㎝)
1 12″ × 3/4″(30㎝ × 2㎝)
Lining ( quilting cotton )
2 7½″ × 6¾″(19㎝ × 17㎝)
Zipper
1 6″(15㎝)
Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
2 7½″ × 6¾″(19㎝ × 17㎝)
Let's get started!!
Place the zipper right sides together on top of the outer layer.
Place the lining on top of the zipper. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Layer an outer layer face up, then the zipper face down along one edge, and then the lining face down. Sew with an allowance of about 3/8″.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Fold the strap fabric in half, wrong sides together to make a crease. Then fold each edge in toward the middle and press. Stitch along long edges of the strip.
Place the strap on one side of the outer layer and sew.
Flip the layers so the outer pieces are right sides together, and the lining pieces are right sides together.
Sew with an allowance of about 3/8″, leaving a 2-inch opening.
Fold the outer and lining so that the zipper is the center, Sew the lower part of the zipper with a seam allowance of 3/8″.
Align the upper part of the zipper as shown in the picture and pin it.
Sew with an allowance of about 1/4″.
Turn out our triangle zipper pouch through the hole that we left not stitched. After this, sew up this hole.
YOU ARE FINISHED!
Happy sewing!
