This is a small wallet that is easy to make.
This wallet has 3 pockets to hold bills, credit cards and coins.
If you check the video, you can learn from the pattern for making this wallet to how to make it easily.
Mini Purse no zipper Step By Step Tutorial
The finished measurements of this pouch are approximately 4″(10㎝) W × 3⅜″ (8.5㎝) H.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( quilting cotton )
2 4¾″ × 7″(12㎝ × 17.5㎝)
Lining ( quilting cotton )
2 12″ × 5″(30㎝ × 12.5㎝)
1 5¾″ × 6″(14.5㎝ × 15㎝)
9.5mm Snaps Button
Interfacing (Mid-weight woven – Pellon SF-101 Shape Flex’ or ‘Vilene G700’)
1 4″ × 6¼″(10㎝ × 15.5㎝)
1 11¼″ × 4¼″(28㎝ × 10.5㎝)
1 5″ × 2⅝″(12.5㎝ × 6.5㎝)
The pattern for making this can be drawn by yourself by watching my YouTube video.
Cut the interfacing into the shape of the pattern.
And fuse the fusible fleece, centered, to the wrong side.
Place the two linings facing each other and sew the upper part with a seam allowance of 3/8″. Turn inside out and topstitch.
Fold the coin pocket fabric in half and sew it except for a opening. Turn out the coin pocket through the opening. Topstitch the upper part.
Place the coin pocket on the large pocket fabric and sew 3 sides.
Fold the pocket in half and sew 2⅜″ from the right side.
Place the pocket on the outer layer and sew 3 sides.
Place the other outer layer on top of the pocket. Pin and sew around the edges, leaving a 2-inch opening in one side.
Turn out our mini wallet through the hole that we left not stitched.
After this, sew up the part of cover.
Attach the snap buttons.
YOU ARE FINISHED!
Happy sewing!
