You are currently viewing How to Make a Half-Moon Zip Pouch

How to Make a Half-Moon Zip Pouch

In this tutorial, I’ll guide you through the process of creating a charming half-moon zipper pouch using fabric and a roll zipper. I made this pouch in three different sizes, with patterns available for purchase separately. I’ll show the smallest size on YouTube video and that is perfect for use as a coin purse. The process is straightforward and can be completed with just a few simple steps.

tutorial_sewingtimes833469_72
tutorial_sewingtimes1080
tutorial_sewingtimes1080

The finished measurements of this bag are approximately 3⅝″(9㎝) W × 2¼″(5.5㎝) H × 1⅝″(4㎝) D.

You may watch the full video tutorial on my Youtube channel.

Share this video with a lot of people who need it.

Seam allowances are 3/8″ unless otherwise specified.

Let's get started!!

To make this you will need:

◆ Main Panel
① 5⅛″ × 7½″ (13㎝ × 18.5㎝) Outer layer
① 5⅛″ × 7½″ (13㎝ × 18.5㎝) Lining
① 5⅛″ × 7½″ (13㎝ × 18.5㎝) Fusible fleece
◆ Others
① 2⅜″ × 4″ (6㎝ × 10㎝) Outer layer
① 10¾″ (27㎝) Zipper
① 1⅝″ (4㎝) Wide double fold bias tape 4″(10㎝)

tutorial_sewingtimes1080
tutorial_sewingtimes1080

Cut the fabric and interfacing into the shape of the pattern.
Fuse the fusible fleece, centered, to the wrong side of the outer layer.

tutorial_sewingtimes1080

Separate the roll zipper and Place the zipper right sides together on top of the outer layer. Sew with an allowance of about 1/4″.

tutorial_sewingtimes1080
tutorial_sewingtimes1080

Place the lining, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance. Then Turn right side out.

tutorial_sewingtimes1080

Fold the tab pieces in half, wrong sides together to make a crease.
Then fold each edge in toward the middle and press.
Stitch along both long edges of the strip, 1/8” from the edge.
Cut in half and fold in half to make your tabs.

tutorial_sewingtimes1080

Place tabs on both sides of the main panel and sew.

tutorial_sewingtimes1080

Assemble the zipper by inserting the zipper head. Combine the seams so that a flat base is formed. Sew with an allowance of about 3/8″.

tutorial_sewingtimes1080

Attach the bias tape on the the corner seams.

tutorial_sewingtimes1080

YOU ARE FINISHED!

Happy sewing!