This bag is great for carrying cell phone and small wallet. There are two pockets on the front of the bag. It is simple to sew if you have the basic sewing skills. I show you how to make in detail so that you can make your own Cell Phone Bag.
How to make a Mobile Pouch Tutorial
The finished measurements of this bag are approximately 5¼″(13㎝) W × 8″(20㎝) H × 3/4″(2㎝) D .
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( Quilting Cotton )
1 6¾″ × 3″ (17㎝ × 7.5㎝)
1 6¾″ × 5¾″ (17㎝ × 14.5㎝)
1 3⅛″ × 3⅜″ (8㎝ × 8.5㎝)
2 6¾″ × 9⅛″ (17㎝ × 23㎝)
Lining ( Quilting Cotton )
1 6¾″ × 3″ (17㎝ × 7.5㎝)
1 6¾″ × 5¾″ (17㎝ × 14.5㎝)
1 3⅛″ × 3⅜″ (8㎝ × 8.5㎝)
2 6¾″ × 7⅛″ (17㎝ × 18㎝)
2 6¾″ × 9⅛″ (17㎝ × 23㎝)
Zipper
1 6″(15㎝)
5/8″(1.5㎝) wide Webbing Strap 59¼″(150㎝)
5/8″(1.5㎝) wide Square Ring and Triglides Slide
Plastic snap buttons
Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
2 6″ × 8⅜″ (15㎝ × 21㎝)
1 2⅜″ × 2⅝″ (6㎝ × 6.5㎝)
Mid-weight woven fusible interfacing (Pellon SF-101 Shape Flex’ or ‘Vilene G700’)
1 6″ × 6″ (15㎝ × 15㎝)
1 2⅜″ × 2⅝″ (6㎝ × 6.5㎝)
Place and sew the right sides together of the small pieces of fabric.Turn right side out. Topstitch around the edges.
Place the flap on the right side of the main panel and sew.
Layer an outer piece face up, then the zipper face down along one edge, and then the lining face down. Sew with an allowance of about 3/8″.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
Place the zipper panel on the right side of the lining and sew.
Place the other lining, right side down on top. Sew along top edge using a 3/8″ seam allowance.
Open out and top stitch the top edge.
Place the zipper pocket on the right side of the main panel and sew.
Place the right sides together of the main fabrics and sew with an allowance of about 3/8″.
Combine the seams so that a flat base is formed. Sew 3/4″ long.
Place the right sides together of the linings and sew with an allowance of about 3/8″, leaving an opening.
Place and pin the outer layer in the lining with the right sides together. Sew with an allowance of about 3/8″.
Turn it right side out by pulling the fabric through the opening. Sew the opening hole close.
Topstitch all the way around of the top of the bag entrance.
Attach the strap.
YOU ARE FINISHED!
Happy sewing!
