This is a pouch bag that can be seen all inside by opening the two zippers.
It is a good size for storing cosmetics and toiletries.
And it has a handle, so it would be good to use it for travel.
Travel Pouch Toiletry bag Sewing Tutorial
The finished measurements of this bag are approximately 8″(20㎝) W × 4″(10㎝) H × 5″(12.5㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( quilting cotton ) – 1/4 yard
2 12¾″ × 7⅞″ ( 32㎝ × 19.75㎝ )
1 3¾″ × 14⅛″ ( 9.5㎝ × 35.5㎝ )
1 3¼″ × 10″ ( 8㎝ × 25㎝ )
Lining ( quilting cotton ) – 1/4 yard
2 12¾″ × 7⅞″ ( 32㎝ × 19.75㎝ )
1 3¾″ × 14⅛″ ( 9.5㎝ × 35.5㎝ )
Interfacing (Fusible Fleece – 987F Fusible Fleece or Vilene H630)
2 12¾″ × 8¼″ ( 32㎝ × 20.75㎝ )
1 3¾″ × 14⅛″ ( 9.5㎝ × 35.5㎝ )
Zipper
2 12″(30㎝)
9.5mm Snaps Button
The pattern for making this can be drawn by yourself by watching my YouTube video.
Place two zippers face-up on the right side of the zipper panel lining.
And sew with an allowance of about 1/4″.
Place the outer layer on top of the zip.
And sew with an allowance of about 3/8″.
Then turn out and press.
Place the zipper panel between the outer and lining of the body and sew the other side of the zipper.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 1/8” away from the zipper.
The outer and the lining are facing each other and sew with an allowance of about 3/8″, leaving a 3-inch opening on the lining.
Make a handle, put it on the side of the outer layer, and sew it.
Turn out this bag through the opening.
After this, sew up this opening, and the double zip gear bag is ready!
YOU ARE FINISHED!
Happy sewing!
