You are currently viewing DIY Half-Moon Zipper Pouch with Handle

DIY Half-Moon Zipper Pouch with Handle

Looking for a fun and useful sewing project? Join us as we create a unique half-moon shaped zipper pouch with a handy strap for easy carrying. We’ll walk you through every step, from cutting the fabric to installing the zipper and adding the finishing touches. Perfect for beginners and seasoned crafters alike, this project will leave you with a stylish accessory to show off!

tutorial_sewingtimes1024768
tutorial_sewingtimes1024768
tutorial_sewingtimes1024768
tutorial_sewingtimes1024768

The finished measurements of this bag are approximately 5″(12.5㎝) W × 3⅝″(9㎝) H × 1⅝″(4㎝) D.

You may watch the full video tutorial on my Youtube channel.

Share this video with a lot of people who need it.

Seam allowances are 3/8″ unless otherwise specified.

Let's get started!!

To make this you will need:

◆ Main Panel
① 9¼″ × 9½″ (23.5㎝ × 24㎝) Outer layer
① 9¼″ × 9½″ (23.5㎝ × 24㎝) Lining
① 9¼″ × 9½″ (23.5㎝ × 24㎝) Fusible fleece
◆ Zipper Panel
② 7¾″ × 1⅜″ (19.5㎝ × 3.5㎝) Outer layer
② 7¾″ × 1⅜″ (19.5㎝ × 3.5㎝) Lining
② 7¾″ × 1⅜″ (19.5㎝ × 3.5㎝) Fusible fleece
◆ Others
① 2⅜″ × 4″ (6㎝ × 10㎝) Outer layer
① 1⅝″ × 4⅜″ (4㎝ × 11㎝) Outer layer
① 7¾″ (19.5㎝) Zipper
① 1⅝″(4㎝) Wide bias tape 23¾″(60㎝)

tutorial_sewingtimes1024768
tutorial_sewingtimes1024768
tutorial_sewingtimes1024768

With assembled lining right side up, center zipper right side facing up along top edge. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance. Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.

tutorial_sewingtimes1024768

Open out, press pieces away from and top stitch on both 1/8” away from the zipper.

tutorial_sewingtimes1024768

With assembled lining right side up, center zipper panel right side facing up along both sides. Place the outer layer, right side down on top. Sew both sides using a 3/8″ seam allowance.

tutorial_sewingtimes1024768

Turn them right side out. Fold half and mark mid points.

tutorial_sewingtimes1024768

Pin the Zipper panel to the Main panel, pinning first at the center. Then pin the ends in place. With sharp scissors make small snips on the gusset at the round shape of the main panel. The small snips will help the curved edge of the pouch. Sew with an allowance of about 3/8″.

tutorial_sewingtimes1024768
tutorial_sewingtimes1024768

The bias tape is placed and pinned on to the seam, stitch up to the end. Stitch from the right side seam into seam, or sew manually from the backside.

tutorial_sewingtimes1024768

YOU ARE FINISHED!

Happy sewing!

Awin