Today I made a simple tri fold keycase.
There is convenient inside pockets for one or two credit cards.
Try to make your own key wallet that is easy to make.
Key Chain Holder Step By Step Tutorial
The finished measurements of this bag are approximately 2⅝″(6.5㎝) W × 4⅜″(11㎝) H × 3/8″(11㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
Outer layer ( quilting cotton )
1 7⅞″ × 4⅜″ ( 18㎝ × 11㎝ )
1 4⅜″ × 4⅜″ ( 11㎝ × 11㎝ )
1 3¼″ × 4⅜″ ( 8㎝ × 11㎝ )
1 1½″ × 2⅜″ ( 3.5㎝ × 6㎝ )
Lining ( quilting cotton )
1 7⅞″ × 4⅜″ ( 18㎝ × 11㎝ )
Interfacing (Mid-weight woven – Pellon SF-101 Shape Flex’ or ‘Vilene G700’)
2 7⅞″ × 4⅜″ ( 18㎝ × 11㎝ )
1 4⅜″ × 3⅝″ ( 11㎝ × 9㎝ )
1 3¼″ × 4⅜″ ( 8㎝ × 11㎝ )
1½″(4㎝) Wide Bias tapes – 23¾″(60㎝)
Lobster Clasps Clips
9.5mm Snaps Button
10㎜ Keychain Clip
The pattern for making this can be drawn by yourself by watching my YouTube video.
Cut the interfacing into the shape of the pattern.
And fuse the fusible fleece, centered, to the wrong side.
Place the wrong sides together of the outer and lining and sew with an allowance of about 1/4″.
Fold in half to make the left pocket panel.
Then place the left pocket of the inside of the pouch.
Sew with an allowance of about 1/4″, leaving entrance.
Fold in half to make the card pocket panel, then sew with 1/4″ seam allowance.
Turn right side out and prss.
Place the card pocket of the inside of the pouch.
Then sew top and bottom.
Attach the key chain clip.
Pin the bias tape to the details.
The bias tape is placed and pinned as pictured, stitch up to the all around.
Stitch from the right side seam into seam, or sew manually from the backside.
Attach the Lobster Clasps Clips.
YOU ARE FINISHED!
Happy sewing!
