You are currently viewing DIY Tiny Box Pouch

DIY Tiny Box Pouch

This tiny box pouch is a cute yet multi useful pouch for you to make. You can use it as a coin purse or earphone holder or a small cosmetic pouch. And if you give this to someone, everyone will love it.

So Cute Zipper Pouch Tutorial

The finished measurements of this bag are approximately 3⅝″(9㎝) W × 1¼″(3㎝) H × 1¼″(3㎝) D.

You may watch the full video tutorial on my Youtube channel.

Share this video with a lot of people who need it.

Seam allowances are 3/8″ unless otherwise specified.

Let's get started!!

To make this you will need:

Outer layer ( Quilting Cotton )
1   5½″ × 5¼″ (12㎝ × 11㎝)
2   1⅝″ × 2″ (4㎝ × 5㎝)

Lining ( Quilting Cotton )
1   5½″ × 5¼″ (12㎝ × 11㎝)

Zipper
1   4¾″(12㎝)

Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
1   4¾″ × 4½″ (12㎝ × 11㎝)

Swivel Snap

The pattern for making this can be drawn by yourself by watching my YouTube video.

Cut the interfacing into the shape of the pattern. And fuse the fusible fleece, centered, to the wrong side. Cut by adding 3/8” from the edge of the interfacing.

Fold the pull tab pieces in half, wrong sides together to make a crease. Then fold each edge in toward the middle and press. Stitch along long edge of the strip, 1/8” from the edge.

Feed the pull tab through the hole of the Swivel Snap. Place the pull tap of the front exterior piece, secure in place with a sewing clip, then sew with 1/4″ seam allowance.

Place the zipper right sides together on top of the outer layer.

Place the lining on top of the zip. Sew with an allowance of about 3/8″.

Open out, press pieces away from the zipper.

Attach the outer and lining to the other side of the zip the same way, leaving an opening on one zipper.

Turn right side out. Press pieces away from and top stitch on both 1/8” away from the zipper, leaving an opening on one zipper.

Turn wrong side out again.

Center the zipper and arrange the outer and lining.

Sew both sides with an allowance of about 3/8″.

Combine the seams so that a flat base is formed. Sew with an allowance of about 3/8″.

Turn out our tiny box pouch through the hole that we left not stitched. After this, sew up this hole, and the pouch is ready!

YOU ARE FINISHED!

Happy sewing!