Are you looking for a new sewing project to tackle? Look no further than our DIY fabric coin purse tutorial! In this step-by-step guide, we’ll teach you how to sew a small, square-shaped wallet that’s perfect for carrying your coins, cards, and small essentials. With its convenient snap button closure, card holder, and zipper pocket, this coin purse is versatile and practical. Whether you’re a beginner or an experienced sewist, this tutorial offers valuable tips and techniques that will help you create a stylish accessory that’s sure to impress. Join us as we dive into the world of sewing and create a chic coin purse together!
The finished measurements of this bag are approximately 4″(10㎝) W × 3⅜″(8.5㎝) H × 1″(2.5㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◆ Front Panel
① 4¾″ × 4¼″ (12㎝ × 10.5㎝) Outer layer
① 4¾″ × 4¼″ (12㎝ × 10.5㎝) Lining
① 4″ × 3⅜″ (10㎝ × 8.5㎝) Fusible fleece
◆ Back Panel
① 4¾″ × 7¾″ (12㎝ × 19.5㎝) Outer layer
① 4″ × 6⅞″ (10㎝ × 17.5㎝) Fusible fleece
◆ Side Panel
① 1¾″ × 11⅛″ (4.5㎝ × 28㎝) Outer layer
① 1¾″ × 11⅛″ (4.5㎝ × 28㎝) Lining
① 1″ × 10¼″ (2.5㎝ × 26㎝) Fusible fleece
◆ Card Pocket
① 4¾″ × 9½″ (12㎝ × 24㎝) Outer layer
◆ Back Pocket
① 4¾″ × 6″ (12㎝ × 15㎝) Outer layer
◆ Inside Zipper Pocket
① 4¾″ × 3⅝″ (12㎝ × 9㎝) Lining
② 4¾″ × 4½″ (12㎝ × 11.5㎝) Lining
① 4¾″ × 5″ (12㎝ × 12.5㎝) Lining
◆ Others
① 4″ (10㎝) Zipper
① 5/8″(1.5㎝) wide Swivel Snap
① 2⅜″ × 2″ (6㎝ × 5㎝) Swivel Snap fabric
① 1⅝″(4㎝) wide bias tape 27⅝″(70㎝)
① Snap Buttons
Fold the card pocket fabric and top-stitch only the top.
Place the card pocket on the front panel and sew.
Place the right sides together of the outer and lining of the front panel and sew the top with an allowance of about 3/8″.
Place the right sides together of the outer and lining of the side panel and sew the both sides with an allowance of about 3/8″.
Open the front panel and assemble the front panel and the side panel.
Fold the outer layer to face the front and top-stitch the top.
Place the back pocket under the back panel and sew.
With assembled 3⅝″ height fabric right side up, center zipper right side facing down along top edge.
Place the 5″ height fabric, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Open out 3⅝″ height fabric, press pieces away from and top stitch on 1/8” away from the zipper.
Attach the 11.5㎝(4½″) height fabrics to the other side of the zip the same way.
Place the wrong sides together of the back panel and zipper pocket of the and sew all the edges.
Place the right sides together of the back panel and bias tape and sew with an allowance of about 3/8″.
Place the front panel on the right side of the zipper pocket and sew.
Fold the bias tape inward twice and sew.
YOU ARE FINISHED!
Happy sewing!
