You are currently viewing DIY HEART COIN PURSE

DIY HEART COIN PURSE

This Heart Coin Purse is a cute yet multi useful pouch for you to make. You can use it as a coin purse or earphone holder or a small cosmetic pouch. And if you give this to someone, everyone will love it. I’ve shared a pattern so you can make this.

Heart Zipper Pouch Sewing Pattern & Tutorial [sewingtimes]

The finished measurements of this pouch are approximately 6″(15㎝) W × 5″(12.5㎝) H.

You may watch the full video tutorial on my Youtube channel.

Share this video with a lot of people who need it.


Let's get started!!

To make this you will need:

Outer layer ( Quilting Cotton )
1   6¾″ × 6″ (17.5㎝ × 15㎝)
2   3¾″ × 6¼″ (9.5㎝ × 15.5㎝)
1   2⅜″×2″ (6㎝ × 5㎝)

Lining ( Quilting Cotton )
1   6¾″ × 6″ (17.5㎝ × 15㎝)
2   3¾″ × 6¼″ (9.5㎝ × 15.5㎝)

Zipper
1 4″ (10㎝)

Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
2   6″ × 5″ (15㎝ × 12.5㎝)

Cut the interfacing into the shape of the pattern. Fuse the fusible fleece, centered, to the wrong side.

With assembled lining right side up, center zipper right side facing up along top edge. Pin in place. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance. Open out, press pieces away from the zipper.

Attach the outer and lining to the other side of the zip the same way. Open out, press pieces away from and top stitch on both 1/8” away from the zipper.

Place the wrong sides together of the outer and lining of the back panel. And place the wrong sides together of the front and back panel and sew with an allowance of about 0.2″.

Turn wrong side out. Sew again with a seam allowance of 1/4″.

Turn out our heart coin purse through opening zipper, and the pouch is ready!

To make this you will need:

Outer layer ( Quilting Cotton )
1   6¾″ × 6″ (17.5㎝ × 15㎝)
1   4⅜″ × 6¼″ (11㎝ × 15.5㎝)
1   2⅜″ × 6¼″ (6㎝ × 15.5㎝)
1   2⅜″×2″ (6㎝ × 5㎝)

Lining ( Quilting Cotton )
1   6¾″ × 6″ (17.5㎝ × 15㎝)
1   4⅜″ × 6¼″ (11㎝ × 15.5㎝)
1   2⅜″ × 6¼″ (6㎝ × 15.5㎝)

Zipper
1   4¾″ (12㎝)

Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
2   6″ × 5″ (15㎝ × 12.5㎝)

Cut the interfacing into the shape of the pattern. Fuse the fusible fleece, centered, to the wrong side.

With assembled lining right side up, center zipper right side facing up along top edge. Pin in place. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance. Open out, press pieces away from the zipper.

Attach the outer and lining to the other side of the zip the same way. Open out, press pieces away from and top stitch on both 1/8” away from the zipper.

The rest of the process is the same as how to make type A.

YOU ARE FINISHED!

Happy sewing!