You are currently viewing DIY Travel Essential – Passport Wallet

DIY Travel Essential – Passport Wallet

This Travel Passport Wallet will keep your travel documents and cell phone. It can hold everything you need to travel, including your passport, ID card, credit card,some cash etc. And I attached a wristlet for portability.

Cell Phone Wallet Wristlet Tutorial

The finished measurements of this bag are approximately 4⅜″(11㎝) W × 7⅛″(18㎝) H.

You may watch the full video tutorial on my Youtube channel.

Share this video with a lot of people who need it.

Seam allowances are 3/8″ unless otherwise specified.

Let's get started!!

To make this you will need:

Outer layer ( Quilting Cotton )
1   9¾″ × 8¼″ (25㎝ × 20.5㎝)
1   3½″ × 3¾″ (9㎝ × 9.5㎝)
1   2⅜″ × 15¾″ (6㎝ × 40㎝)
—————————————-
1   4⅛″ × 4″ (10.5㎝ × 10㎝)
1   4¾″ × 2¾″ (12㎝ × 7㎝)
2   4¾″ × 3⅜″ (12㎝ × 8.5㎝)

Lining ( Quilting Cotton )
1   9¾″ × 8¼″ (25㎝ × 20.5㎝)
1   3½″ × 3¾″ (9㎝ × 9.5㎝)
—————————————-
1   4⅛″ × 8¼″ (10.5㎝ × 20.5㎝)
1   4¾″ × 2¾″ (12㎝ × 7㎝)
1   4¾″ × 5¾″ (12㎝ × 14.5㎝)
1   5″ × 8¼″ (12.5㎝ × 20.5㎝)
1   16½″ × 8¼″ (41㎝ × 20.5㎝)

Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
1   9″ × 7½″ (23㎝ × 18.5㎝)
1   2¾″ × 3″ (7㎝ × 7.5㎝)

Mid-weight woven fusible interfacing (Pellon SF-101 Shape Flex’ or ‘Vilene G700’)
1   3⅜″ × 3¼″ (8.5㎝ × 8㎝)
1   4″ × 2″ (10㎝ × 5㎝)
2   4″ × 2⅝″ (10㎝ × 6.5㎝)
1   3⅝″ × 7½″ (9㎝ × 18.5㎝)
2   4¼″ × 7½″ (10.5㎝ × 18.5㎝)

5/8″(1.5㎝) wide D ring and Swivel Snap
Plastic snap buttons

The pattern for making this can be drawn by yourself by watching my YouTube video.

Cut the interfacing into the shape of the pattern. And fuse the fusible fleece, centered, to the wrong side. Cut by adding 3/8” from the edge of the interfacing.

Place the right sides together of the small pieces of fabric. Round two of the corners with a sharp pair of scissors. Pin and sew around the edges, leaving an opening in one side. Turn it right side out by pulling the fabric through the opening. Press, pin and topstitch around all the edges.

Place and sew the D-ring strap and Falp on the outer layer of the main fabric.

Place the right sides together of the outer and lining of a small pocket and sew with an allowance of about 3/8″.

Turn it right side out. Press and topstitch the top edge.

Fold the lining 3¼″ and Sew both sides of the pocket.

Place the right sides together of the outer and lining of card slots and sew with an allowance of about 3/8″.

Turn it right side out. Press and topstitch the top edge.

Sew the lining of the first card slot and the outer fabric of the second card slot together. Sew the lining of the second card slot and the outer fabric of the third card slot together.

Fold the stitched part and sew both sides of the card pocket.

Place the right sides together of the Small pocket and card pocket and sew with an allowance of about 3/8″.

Place the lining, right side down on top. Sew with an allowance of about 3/8″.

Open out, press and topstitch the top edge.

Place the inner pockets on the right side of the lining and sew.

Place the right sides together of the outer and lining of the main panel.

Sew with an allowance of about 3/8″, leaving a 3-inch opening.

Turn out our Travel Wallet through the hole that we left not stitched. After this, sew up this hole by manual.

Attach the strap.

YOU ARE FINISHED!

Happy sewing!