You are currently viewing DIY Triangle Pouch

DIY Triangle Pouch

Today, I’m sharing this pouch with you without zipper. This triangle zipper pouch is such a fun and unique shape, it’s just too cute! I love this for organizing small accessories, traveling with toiletries, and giving them as gifts. And you can also learn How to install a flex frame.

How to make a Pyramid Snap Bag

The finished measurements of this bag are approximately 4⅜″(11㎝) W × 4⅜″(11㎝) H × 4⅜″(11㎝) D.

You may watch the full video tutorial on my Youtube channel.

Share this video with a lot of people who need it.

Seam allowances are 3/8″ unless otherwise specified.

Let's get started!!

To make this you will need:

Outer layer ( Quilting Cotton )
1   9¾″ × 2⅛″ (25㎝ × 5.5㎝)
1   9¾″ ×3⅝″ (25㎝ × 9㎝)
2   5″ × 2⅛″ (12.5㎝ × 5.5㎝)

Lining ( Quilting Cotton )
1   9¾″ × 5″ (25㎝ × 12.5㎝)

4¼″(10.5㎝) Metal Internal Flex Frame

Fusible fleece (It is similar to Pellon 987F ‘ or ‘Vilene H630’)
1   9″ × 4¼″ (23㎝ × 10.5㎝)

Place the right sides together of the outer layers and sew with an allowance of about 3/8″.

Open out, press pieces. Attach the interfacing to the center of the wrong side of the fabric.

Fold both ends of the fabric 3/8″.

Then fold in half and press pieces.

Place the fabric 5/8″ from the end on the main fabric. Sew with an allowance of about 1/4″.

Fold main fabric in half with the long sides together.

Sew with an allowance of about 3/8″, leaving a 2-inch opening on the lining.

Open the seam.

Turn the lining wrong side out. Place and pin the lining of the pouch over the top of the outer layer with the right sides together.

Stitch all the way around of the top of the pouch entrance.

Pull the lining out and take it out.

Fold the seam allowance in the center. Sew with an allowance of about 3/8″.

Turn out our pouch through the hole that we left not stitched. After this, sew up this hole.

Put the lining inside the outer layer.

Topstitch all the way around of the top of the pouch entrance.

Now take the frame and pull it through the sleeve.

You will have one side closed and one open.

On the open side – close the frame and insert the tiny pin.

YOU ARE FINISHED!

Happy sewing!