Hello, today I will introduce a very convenient tote bag with many pockets.
Cute pockets on the front and back of the bag allow you to easily store your phone. The divider inside the bag is completely blocked to the bottom so things don’t get mixed up. And the wide bottom of the bag is good for storing a lot of things, so I think it would be appropriate to use it as a diaper bag.
Make your own multi-pocket tote bag.
The finished measurements of this bag are approximately 9″(22.5㎝) W × 9″(22.5㎝) H × 8″(20㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◎ Main Panel
② 17⅝″ × 8¾″ (44.5㎝ × 22㎝) Outer layer
② 17⅝″ × 13¾″ (44.5㎝ × 34.5㎝) Lining
② 16⅞″ × 8″ (42.5㎝ × 20㎝) Mid-weight woven fusible interfacing
◎ Bottom Panel
① 17⅝″ × 10¾″ (44.5㎝ × 27㎝) Outer layer
① 16⅞″ × 9⅞″ (42.5㎝ × 25㎝) Mid-weight woven fusible interfacing
◎ Outside Pocket
② 5⅝″ × 12⅝″ (14㎝ × 32㎝) Outer layer
② 4¾″ × 6″ (12㎝ × 15㎝) Mid-weight woven fusible interfacing
◎ Zipper Panel
② 7¾″ × 3″ (19.5㎝ × 7.5㎝) Outer layer
② 7¾″ × 3″ (19.5㎝ × 7.5㎝) Lining
② 6⅞″ × 2¼″ (17.5㎝ × 5.5㎝) Mid-weight woven fusible interfacing
◎ Divider Panel
① 10¼″ × 17¾″ (26㎝ × 45㎝) Lining
① 8¾″ × 15⅞″ (22㎝ × 40㎝) Mid-weight woven fusible interfacing
① 5⅝″ × 16⅝″ (14㎝ × 42㎝) Lining
① 4″ × 15⅞″ (10㎝ × 40㎝) Mid-weight woven fusible interfacing
① 5¾″ × 8¾″ (14.5㎝ × 22㎝) Lining
① 5″ × 4″ (12.5㎝ × 10㎝) Mid-weight woven fusible interfacing
◎ Others
① 11⅞″ (30㎝) Zipper
① 2″ × 2¾″ (5㎝ × 7㎝) Zipper end fabric
① 1¼″(3㎝) wide Webbing Strap 59¼″(150㎝)
The pattern for making this can be drawn by yourself by watching my YouTube video.
Fold half the front pocket fabric, stitch the top.
Place the front pocket on the right side of the main panel. Sew 3 sides of the pocket leaving the top.
Place and sew the straps 4¾″ interval.
Fold the both sides of the zipper panel 3/8″.
With assembled lining right side up, center zipper right side facing up along top edge. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Attach the outer and lining to the other side of the zip the same way.
Align the center of the main panel and the zipper panel and sew.
Place the right sides together of the main panel and bottom panel and sew with an allowance of about 3/8″.
Fold half the main panel and sew the both sides.
Combine the seams so that a flat base is formed. Sew with an allowance of about 3/8″.
Fold half the divider panel and sew with an allowance of about 3/8″, leaving an opening.
Turn right side out and stitch.
Place the divider on top of the largest divider and sew.
Place on the lining and sew in 5/8″ from the bottom.
Place the other lining on top of them and sew the bottom with a seam allowance of 3/8″.
Place the side of the divider in 1/2″ from the side of the lining and sew.
Place the right sides together of the lining and sew the both sides with an allowance of about 3/8″.
Combine the seams so that a flat base is formed. Sew with an allowance of about 3/8″.
Fold the outer and lining bag openings to within 3/8″ each and iron them.
Put the lining inside the outer layer and sew along the opening of the bag.
YOU ARE FINISHED!
Happy sewing!
