Create your own DIY crossbody water bottle holder that’s as stylish as it is practical. This holder includes a handy front pocket for your phone, a secure cinch-cord for your water bottle, and an adjustable strap for comfortable carrying. The waterproof lining ensures your valuables are protected from the elements, making it ideal for any outdoor activity or daily commute. This post will guide you through all the steps to make this versatile accessory, from selecting the right materials to the final stitching. Whether for personal use or as a thoughtful gift, this water bottle holder is a great addition to any active wardrobe.
The finished measurements of this bag are approximately 3⅝″(9㎝) W × 7⅛″(18㎝) H × 3⅝″(9㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◆ Main Panel
① 10¼″ × 10⅞″ (26㎝ × 27.5㎝) Outer layer
① 4⅜″ × 8″ (11㎝ × 20㎝) Outer layer
① 13¾″ × 9⅜″ (35㎝ × 23.75㎝) Waterproof Fabric
① 9½″ × 10⅛″ (24㎝ × 25.5㎝) Fusible fleece
① 3⅝″ × 7⅛″ (9㎝ × 18㎝) Fusible fleece
◆ Front Pocket
② 5⅝″ × 6⅞″ (14㎝ × 17.5㎝) Outer layer
◆ Draw String Casing
① 13¾″ × 6¾″ (35㎝ × 17㎝) Contrast Color Fabric
◆ Strap
① 43½″ × 3¼″ (110㎝ × 8㎝) Outer layer
① 4″ × 2⅜″ (10㎝ × 6㎝) Outer layer
◆ Others
① 3/16″ (5㎜) String 19¾″㎝ (50)
① Fold Over Elastic 4⅜″ (11㎝)
① String Stopper
② 5/8″ (1.5㎝) Wide D-ring
② 3/4″ (2㎝) Wide Swivel Snap
① 3/4″ (2㎝) Wide Triglides Slide
Cut the fabric into the shape of the pattern.
Make corners on both sides of the bottom of the front pocket.
Place the wrong sides together of the two pocket fabric.
Fold the Fold Over Elastic over the top of the pocket and sew.
Place the front pocket on the right side of the main panel.
Make and sew the bottom of the main panel.
Place the front and back panels of the main panel together and sew the sides and bottom.
Fold the string casing fabric in half widthwise and sew, leaving a 1¼″ string passage.
Fold it in half and sew along the top 5/8″.
Fold the lining in half widthwise and sew, leaving an opening.
Place the sides in the center and sew the bottom.
Combine the seams so that a flat base is formed. Sew with an allowance of about 3/8″.
Place the top of the string casing on top of the outer layer and sew.
Put the outer layer inside the lining and align the opening. Sew with an allowance of about 3/8″.
Turn it right side out by pulling the fabric through the opening. Topstitch all the way around of the top of the bag entrance.
Sew the opening hole close.
Insert the string through the casing, using a safety pin.
Attach the strap.
YOU ARE FINISHED!
Happy sewing!
