If you’re searching for an easy DIY sewing project, this mini pouch tutorial is perfect for beginners and experienced sewists alike. This small zipper pouch is not only cute and functional but also makes a thoughtful handmade gift. Learn how to sew your own mini pouch with this step-by-step video tutorial, and create a charming little item that can hold your essentials. Great for birthdays, holidays, or just because!
The finished measurements of this pouch are approximately 3⅝″(9㎝) W × 2⅝″(6.5㎝) H × 1¼″(3㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
Let's get started!!
To make this you will need:
◆ Main Panel
① 6½″ × 6⅞″ (16.5㎝ × 17.5㎝) Outer layer
① 6½″ × 6⅞″ (16.5㎝ × 17.5㎝) Lining
① 6½″ × 6⅞″ (16.5㎝ × 17.5㎝) Fusible fleece
◆ Zipper panel
② 5¾″ × 1″ (14.5㎝ × 2.5㎝) Outer layer
② 5¾″ × 1″ (14.5㎝ × 2.5㎝) Lining
② 5¾″ × 1″ (14.5㎝ × 2.5㎝) Fusible fleece
◆ Bottom panel
① 3¾″ × 1⅜″ (9.5㎝ × 3.5㎝) Outer layer
◆ Handle
② 9⅞″ × 1⅜″ (25㎝ × 3.5㎝) Outer layer
◆ Others
① 5¾″ (14.5㎝) Zipper
① 2″ (5㎝) Sewing label
Cut the fabric and interfacing into the shape of the pattern.
First, attach the label to the outer layer of the main panel, then place the handle as shown in the photo above and sew it.
Fold all four sides of the bottom panel inward and iron, then place it in the center of the main panel and sew.
Place the zipper right sides together on top of the outer layer. Sew with an allowance of about 1/4″. Open out, press pieces away from the zipper. Attach the outer to the other side of the zip the same way. Open out, press pieces away from and top stitch 1/8” away from the zipper.
Place the right sides together of the main panel and zipper panel and sew both sides with an allowance of about 1/4″. Place the right sides together of the main panel and zipper panel and sew all the edge.
Fold the lining zipper panel inward by 1/4″. Place the right sides together of the zipper panel and main panel and sew both sides with an allowance of about 1/4″.
Turn the lining right side out and place the outer layer inside the lining.
Blind stitch the lining along the zipper.
YOU ARE FINISHED!
Happy sewing!
