Looking for a practical DIY travel organizer you can sew at home? This step-by-step tutorial shows how to make an All-in-One Roll Up Pouch featuring 3 zipper pockets plus side mesh compartments to store makeup, tech cables, or sewing notions. The roll-up design saves space, keeps items easy to find, and gives a professional, store-bought finish. Perfect for personal use and a high-demand handmade item to sell.
The finished measurements of this pouch are approximately 8¾″(22㎝) W × 6″(15㎝) H × 3¼″(8㎝) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Seam allowances are 3/8″ unless otherwise specified.
I think you might also be interested in the 2-in-1 vanity pouch.
Let's get started!!
To make this you will need:
◆ Main panel
① 8¾″ × 16⅝″ (22㎝ × 42㎝) Outer layer
① 8¾″ × 16⅝″ (22㎝ × 42㎝) Lining
① 8″ × 15⅞″ (20㎝ × 40㎝) Mid-weight woven fusible interfacing
◆ Zipper pouch
③ 9½″ × 11½″ (24㎝ × 29㎝) Outer layer
③ 9½″ × 11½″ (24㎝ × 29㎝) Lining
③ 8¾″ × 10¾″ (22㎝ × 27㎝) Mid-weight woven fusible interfacing
◆ Mesh pocket
② 8¾″ × 5″ (22㎝ × 12.5㎝) Mesh Fabric
② 8¾″ × 1⅝″ (22㎝ × 4㎝) Outer layer
◆ Zipper tab
⑥ 1⅝″ × 1¼″ (4㎝ × 3㎝) Outer layer
◆ Others
① 19¾″(50㎝) Zipper_seam allowance excluded
② 8″(20㎝) Zipper_seam allowance excluded
① 25″(63㎝) Roll Zipper_seam allowance included
② Plastic Snap Buttons
① 1⅝″(4㎝) Wide bias tape 118″(300㎝)
Bind the top and bottom edges of the mesh fabric with bias tape. Place the zipper right side down on the right side of the exterior fabric and stitch. Attach the mesh fabric to the other side of the zipper.
Place the mesh pockets on both sides of the main lining (right side) and sew around the edges.
Place the main exterior and lining fabrics wrong sides together and baste around the entire perimeter.
Sandwich the zipper between the exterior and lining fabrics and sew. With right sides together, sew the side seams of the exterior and lining separately. Turn right side out through the opening and sew the gap closed.
Connect the three finished zipper pouches using plastic snaps.
Align the side corners of the zipper pouches with the center of the main body and stitch to secure. Finish the side edges of the main body with bias binding. Sew zippers to the top and bottom edges of the main body. Apply bias binding over the zipper tape and sew.
Bind the zipper ends and attach them to the center of the main body’s side edges.
YOU ARE FINISHED!
If you found this tutorial helpful, please share it with your sewing friends! Happy sewing, and see you in the next post!
